What exactly is a concrete release agent?

A concrete release agent is actually a material applied to the building template before the concrete is put so the template will not adhere to the concrete surface following flowing, is just not simple to dismantle the cast or influences the complete of the concrete covering. Its main role inside the template and the concrete covering to develop a movie that will probably be separated from the two is additionally known as an isolation agent.

A water-based release agent is an important ancillary inside the release agent and can change the water-based release agent stream and levelling; its primary feature is stability to microorganisms and enzymes, which can reduce the expense of raw materials. A water-based cast release agent can be used in forms and items functional processing ingredients; in the rubber, plastic, and Jinsu processing market, manufacturing cast items aren’t just in order to let the cast release to improve productivity and lengthen the life of the mould utilize. And can make the merchandise clean, size qualified, and lower the creation of scrap, which is an crucial additional vital to forms and items – Water-based Concrete Release Agent.

Concrete release agent plays an essential role inside modern building building; its primary role is to form a layer of isolation film between the template and the concrete surface in order that the template does not stick to the concrete area in order that it is simpler to dismantle the cast following putting and to maintain the finish of the concrete surface. Here, we will introduce the types, features, use and program of concrete release agent in more detail.

Kinds of concrete release agent

Concrete release brokers can be divided into many types according to different category strategies, and the typical classification techniques are as follows:

• According to the scope of use: it can be divided into concrete release agent for building, concrete release agent for bridges, concrete emission agent for tunnels and so on.
• According to the composition: it can be divided into water-based concrete release representatives, oil-based concrete release representatives, silicone oil concrete release brokers, etc.
• According to the use effect: it can be divided into ordinary concrete release agents, an easy task to remove concrete release agents, high-gloss concrete release representatives and so on.

Features of Concrete release agent

A concrete release agent can also be called a concrete remoteness agent or mould release lubricant. It is a sort of material coated on the inner wall of the formwork to play the function of lubricating and isolation in order that the concrete may be smoothly detached from the formwork when taking down the formwork, and the shape of the concrete could be kept intact and undamaged. Compared with the standard release substance motor oil or waste motor oil, the release agent has the benefits of effortless release, no pollution of the concrete surface, no corrosion of the template, easy to paint, low value and so on. However, not all sorts of concrete release agents with a array of supplies made of templates are suitable for different supplies of the template and different building problems and finish requirements of the concrete must be selected for the appropriate release agent in order to receive good results.

As an important construction auxiliary material, concrete release agent has the subsequent characteristics:
Good separation performance: concrete release agent can create a dense isolation motion picture between the formwork and the concrete covering, effectively stopping the formwork from bonding with the concrete area and facilitating the demolding.

Great lubrication performance: concrete release agent has good lubrication efficiency, which can decrease the rubbing between the formwork and concrete covering, reduce the resistance during pouring and boost the construction productivity.

Good anti-adhesion performance: concrete release agents can effectively prevent the formwork from bonding with the concrete area, steering clear of the formwork from damaging the concrete surface when taking apart the formwork.

Excellent waterproof overall performance: concrete release agent has good waterproof efficiency, which can successfully stop moisture from penetrating between the formwork and concrete, steering clear of deformation of the formwork by moisture and increasing the service life of the formwork.

Simple to use and safe: concrete release agent is easy to use; you only need to apply a layer evenly on the formwork; at the same time, it is safe and environmentally friendly and will not pollute the human body and the environment.

When using a concrete release agent, the following steps should be followed:

Prepare tools: concrete release agent is usually sprayed or brushed for construction. You need to prepare construction tools such as a sprayer or brush.

Choose the right release agent: According to the different environments, choose the right concrete release agent, such as indoor use can choose a water-based concrete release agent, and outdoor use can choose an petroleum-based concrete release agent.

Apply the release agent: Pour the appropriate amount of release agent into the sprayer or container, and then evenly spray or brush on the formwork to ensure that each part is coated in place.

Air drying: After application, wait for a period of time to allow the release agent to dry naturally. Generally, it takes 10-20 minutes, depending on the environment.

Pouring concrete: After the release agent is completely air-dried, the concrete can be poured. During the pouring process, care should be taken to avoid air bubbles or voids between the formwork and the concrete covering.

Demolding: Demolding can be carried out after the concrete reaches the strength of demolding. When taking apart the formwork, the connectors at the edge of the formwork should be dismantled first, and then the covering of the formwork should be knocked gently to separate the formwork from the concrete covering gradually. In case of tight bonding between the formwork and the concrete surface, tools can be used appropriately to assist in the dismantling.

Clean up the template: after taking apart the template, the template should be cleaned up to remove the residual concrete and mould release agent. After cleaning, it can be used for the next time.

Application areas of concrete release agent:

Concrete release agent is widely used in all kinds of development projects, mainly including the following aspects:

Reinforced concrete structure: In the construction of a reinforced concrete structure, concrete release brokers can be used for formwork isolation, preventing formwork from bonding with concrete and increasing construction efficiency and quality.

Road construction: in road construction, the concrete release agent can be used to isolate the bond layer between the road formwork and concrete area, to avoid road bubbles, hollow drums and other problems.

Bridge project: In a bridge project, a concrete release agent can be used to isolate the bond layer between the bridge formwork and the concrete area and enhance the construction quality of the bridge pier and abutment.

Tunnelling project: In the tunnelling project, a concrete release agent can be used to isolate the bond layer between tunnel formwork and shotcrete surface to enhance the quality and safety of tunnel construction.

Nuclear power project: In nuclear power project, a concrete release agent can be used to isolate the bond layer between the shell of nuclear power equipment and internal components to ensure the safety and stability of the equipment.

Other fields: concrete release representatives can also be widely used in water conservancy projects, wharf projects, airport projects and other fields to provide effective formwork isolation protection measures for various development projects.

In conclusion, concrete release agent, as an important construction auxiliary material, plays an indispensable role in modern building projects. By choosing the right kind, the correct use method and a reasonable application field, can effectively enhance the construction efficiency and quality of the development project and provide a strong guarantee for the advancement of the building industry.

Concrete concrete release agent Supplier

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives concrete release agent, Concrete water-reducing agent, please feel free to contact us and send an inquiry.

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.